The Behlen 14-foot gray 6-rail utility gate is designed for driveways or entrances to pastures or arenas to contain tame animals. The 20-gauge steel tubes are notched and welded completely around the joints to the gate frame and supported by vertical braces for durability. Behlen’s most popular gate features a 36-inch plated chain and snap assembly and a premium weather-resistant powder coat. This gate is 50 inches high and is made 4 inches less than the listed length to allow for hardware and clearance. Includes 5/8-inch x 6-inch screw hooks for hinges.
Height: 50 inches
Weight: 55 pounds
Six, 1-5/8-inch rails
Two vertical brace
20-gauge steel tubing
Welded latch and 36-inch long plated chain
5/8-inch x 6-inch long screw hooks for hinges
4 inches shorter than listed length to allow for hardware and clearance
Made in the USA
1. Drill 3/8-inch pilot holes in wooden post (sold separately) using gate as a guide.
2. For installing screw hooks, manually screw into post using pilot holes. Place one screw hook up and one down as shown in the illustration above.
3. Install hinge on gate. Place bolt through hole and screw on nut. Leave hinge loose in order to slide it.
4. Place gate on bottom screw hook. With gate in position, slide top hinge onto top screw hook and fasten securely in place.
Quantity Discounts Available. See Store for Details.